ALUNER 103
PRECLEAN AGENT
ALUNER 103 PRECLEAN AGENT
* Non-Corrosive
* Remove metalworking oil
* Remove iron and copper deposit
* Easy to use
PRINCIPAL USES：
ALUNER 103 is a blend of special surfactants and sequestering agent. It removes iron deposit effectively in system that will minimize the corrosion potential in system.
GENERAL DESCRIPTION：
Color …………………………………… Pale yellow
Specific Gravity ……………………… 1.12±0.05
10%pH (at 25°C) ……………………… 7.8±1.0
DOSAGE：
1~2% of whole water amount in chill water system
Water Capacity for 1 meter-long Iron pipe
| Pipe diameter | Capacity | Pipe diameter | Capacity | Pipe diameter | Capacity |
| ½” | 0.18ℓ | 2½” | 3.30ℓ | 10″ | 49.00ℓ |
| ¾” | 0.32ℓ | 3″ | 5.00ℓ | 12″ | 70.70ℓ |
| 1″ | 0.49ℓ | 4″ | 7.90ℓ | 14″ | 96.20ℓ |
| 1¼” | 0.80ℓ | 5″ | 12.50ℓ | 16″ | 125.60ℓ |
| 1½” | 1.26ℓ | 6″ | 17.70ℓ | 18″ | 159.00ℓ |
| 2″ | 1.96ℓ | 8″ | 31.40ℓ | 20″ | 196.30ℓ |
FEEDING：
Feed suitable amount of ALUNER 103 from expansion tank into closed system, let chill water re-circulate for 2 to 4 days. Then blow down the clean solution. When the system is cleaned with ALUNER 103, it should be fed with ALUNER 350 immediately in order to protect the whole system.
HANDLING：
Avoid contact with eyes and repeated contact with skin. Do not take internally.
