SHENHO 330
SLIME REMOVER
SHENHO 330 SLIME REMOVER
PRINCIPAL USE：
Due to the changeable climate circumstance, water pollution, bacterial in air and the environmental factors around cooling tower will bring the significant amount of bacterium in the re-circulating cooling water easily. Besides, they will cause the growth of algae in cooling tower and deposit of slime inside the pipeline of heat exchanger. Such problem will be especially serious to the cooling system of Refrigerant Food Plant and Ferment Factory. SHENHO 330 is the agent mainly to clean that algae and slime existed in the cooling system.
FEEDING & DOSAGE：
| COOLING TOWER | DOSAGE | COOLING TOWER | DOSAGE |
| 10 RT | 0.5 Pail | 150 RT | 7 pails |
| 20 RT | 1 pail | 175 RT | 9 pails |
| 40 RT | 2 pails | 200 RT | 11 pails |
| 80 RT | 3 pails | 250 RT | 13 pails |
| 100 RT | 4 pails | 300 RT | 17 pails |
| 125 RT | 5 pails | 350 RT | 18 pails |
- Keep cooling water circulating continuously（unnecessary to stop the system）. Pour Agent A into cooling tower to circulate for 1~2 hours.
- Thump SHENHO 330 into cooling tower and circulate for 2 days continuously. To keep the effect of SHENHO 330 be workable, don’t make the cooling water flow over its system during the 2-day circulation.（Clean the inlet filter of circulating pump carefully to prevent the block of filter and cause the water lost from circulating pump.）
- Drain off clean agent from system completely after the 2-day circulation, and then flush cooling tower by water to make the loose and dead algae drop out and drain off from system entirely.
- Replace new water and re-start the system.
